English
| Contact Us for Quotation | Email：464560351@qq.com | Whatsapp: +8618620373879 |
Principle Introduction
| The sensing material of TesterMeter-MIX1061 Ozone(O3) Gas Sensor is tin dioxide SnO2, which has low conductivity in clean air. When the ozone gas exists, the conductivity of the sensor will be raise according to the gas concentration goes up. Through a simple circuit, to convert the changes of conductivity to correspond to the gas concentration. |
Features
High sensitivity to wide range of ozone High sensitivity to ozone Long life and low cost High anti-seismic |
Application
Domestic O3 gas leakage detectors Portable Ozone gas detectors |
Technical Parameters
| Item | Details |
| Target Gas | Ozone |
| Measurement Range | 10 ~ 1000 ppm |
| Heater Voltage(Vh) | 5.0V±0.1V AC or DC |
| Sensitivity | Rs(200 ppm O3) / Rs(in air)≥2 |
| Loop Voltage | ≤24V DC |
| Heater Resistance(Rh) | 31Ω±5Ω(Room Temperature) |
| Heater Power Consumption (Ph) | ≤900mW |
| Output In Target Gas | ≥1.0V(in 200 ppm O3) |
| Concentration Slope | ≤0.6 (R10 ppm/R100 ppm O3) |
| Oxygen concentration in used place | 21%, no less than 18%,if used in low oxygen concentration, pleasure contact for detail |
| Life Expectancy(in air) | 7 years |
| Testing Condition | 20˚C± / 2˚C; 55%±5%RH |
Lable:
Ozone(O3) Gas Sensor
