China Testing Instruments Manufacturer,Whatsapp/Wechat:+8618620373879  Email: 464560351@qq.com

TesterMeter-ZSD006 Automatic Capacitance and Inductance Tester
TesterMeter-ZSD006 Automatic Capacitance and Inductance Tester
TesterMeter-ZSD006 Automatic Capacitance and Inductance Tester
TesterMeter-ZSD006 Automatic Capacitance and Inductance Tester
TesterMeter-ZSD006 Automatic Capacitance and Inductance Tester
TesterMeter-ZSD006 Automatic Capacitance and Inductance Tester

TesterMeter-ZSD006 Automatic Capacitance and Inductance Tester

2023-09-13 16:57:33  

TesterMeter-ZSD006 Automatic Capacitance and Inductance Tester

  • Main Feature :
  • Serial No. : lisa0561
Contact Us For QuotationEmail:  464560351@qq.comWhatsapp&Wechat:+8618620373879

TesterMeter-ZSD006 Automatic Capacitance and Inductance Tester

Product overview

With the development of electric power in our country, capacitor compensation device gets unprecedented development, but subsequently, the condenser accident rate rises sharply, and there appeared serious group injury accident. In order to prevent shunt capacitor accidents and ensure the safe and reliable operation of the power grid, the State Grid Corporation has formulated the Measures for Preventing High Voltage Shunt Capacitor Accidents. It is clearly proposed to "regularly measure the capacitance of a single capacitor in the capacitor bank, and it is recommended to use the measurement method without removing the connecting line, so as to avoid the failure of casing oil leakage due to the force caused by disassembling the connecting line".

This instrument is designed for the problems existing in the measurement of high voltage shunt capacitor bank at the substation site, and is specially developed by referring to national standards such as GB3983.2-1989 "High voltage shunt capacitor", DL/T840-2003 "Technical conditions for the use of high voltage Shunt capacitor" and JB5346-1998 "series reactor". It is mainly used to measure high voltage shunt capacitor banks and reactors of reactive power compensation devices.

The instrument uses a high-speed microprocessor, synchronous acquisition of the voltage signal and current signal of the subject, automatic calculation of capacitance value, inductance value equivalent. Field measurement capacitor without removing the connection line, simplify the test process, effectively improve the work efficiency. After the test, the capacitor capacity and other parameters of each phase are calculated automatically. It is easy to distinguish the capacitor quality change and the fault of the connecting conductor between devices.

Functional characteristics

  • The instrument measuring group under the condition of not remove the single capacitance of parallel capacitor (single-phase capacitance and three-phase capacitor can measure), at the same time, the instrument can measure all sorts of reactor inductance, meet a variety of field use.

  • This instrument shows that when the measurement of capacitance or inductance values at the same time also can display the measurement of voltage, current, frequency, impedance, phase Angle and other data.

  • The instrument uses different frequency power output for testing, which greatly improves the anti-interference ability in the field, and can be tested in high intensity magnetic field without affecting the accuracy.

  • Instrument USES the 7.0 -inch, 1024 x 600 high resolution touch screen, touch-screen operation, during the day night, can be observed clearly, switch freely in both English and Chinese, easy to operate.

  • The instrument uses a high-frequency power output for testing, greatly improving the anti-interference ability on site. It can be tested in high intensity magnetic fields without affecting accuracy.

  • Instrument built-in high-capacity nonvolatile memory: can store 500 groups of measuring data.

  • The instrument is equipped with a USB disk interface, which can store any group of measurement data (subject to the capacity limit of the USB disk).

  • Built-in high precision real-time clock function for date and time calibration. 

  • The instrument is equipped with a built-in lithium battery power supply, which is convenient for outdoor use.

  • The instrument can be equipped with an optional printer to print measurement data.

Technical index

Test voltage
AC 100V ±10%, 55Hz
AC 40V±10%, 55Hz
AC 8V±10%, 55Hz
AC 2V±10%, 55Hz
Measuring range and accuracy
Measured capacitance range: 0.1uF ~ 10000uF ± (reading 1%+0.01uF)
Inductance range: 50uH ~ 20H ±(reading 3%+0.05uH)
Measuring current range: 5mA ~ 2A ±(reading 3%+0.05mA)
Measuring resistance range: 20mΩ ~ 20kΩ ±(reading 3%+0.1mΩ)
Dimensions
main engine 360×290×170 (mm) cable box 360×290×170 (mm)
Weight
host 2KG   wire box 8KG
Test line length
Standard with 5 meters length can be customized

Conditions of use

Ambient temperature 
-20 ° C to 40 ° C
Ambient humidity 
≤85%RH
Working power supply
AC220V±10%, 50±1Hz


Instrument package

product name

 quantity

Main machine

1set

Test line

1set

Ground wire

1pcs

Power cord

1pcs

Printer paper

1pcs

Clamp current sensor

1pcs

Fuse

2pcs

Certificate

1pcs

Packing list

1pcs



Telephone
Email
Map
QQ Chat